I’ve decided to sell of a few PDP-8’s as the hoard is getting rather large at the moment and so I’m prepared to part with the following:

• PDP-8/M, 8KW core, M8655 serial UART, very clean machine in working order
• PDP-8/E, 4KW core, M8650 UART, requires a full rebuild
• PDP-8/A, 16KW core, extended memory, serial, paper tape drive and controller (non DEC). Very clean and in working order
• RX8E + RX01 drives
• PC8E + PC04 paper tape
• DECmate III
• WP78 (aka a VT78)

Email offers to toby@pdp11.co.uk . Machines are located in UK

I have two identically spec-ed PDP-8/As which I purchased a couple of years ago across ebay. The machines were originally from a CNC machine and feature 16KW of memory together with paper tape readers.

The cards fitted are as follows:

• M8315 – KK8A PDP-8/A CPU board (hex wide)
• M8317 – KM8AA PDP-8/A bootstrap, powerfail (hex wide)
• M8316 – DKC8AA PDP-8/A I/O serial/parallel/clock (hex wide)
• G650 – MM8AB PDP8A 16K Memory stack (hex wide)
• H219B – MM8AB PDP8A 16K Memory control (hex wide)
• G650 – MM8AB PDP8A 16K Memory stack (hex wide)
• H219B – MM8AB PDP8A 16K Memory control (hex wide)
• Third party paper tape drive controller

(more…)